March 31, 2011
Setting up your broadband modem is not hard
The wireless network is what most of us are using nowadays because they find it to be convenient enough. With wireless network one does not have to use any wiring for them to do the connections. You simply use your router or broadband modem that you have and do the connections. To setup broadband you should first check up if your computer is in good condition first. Most of the times when there is a problem on computer the connections of the broadband might not work out very well. So make sure the software and the hardware are in good condition first. If they are then you can continue to set up your broadband modem. Installing your modem needs you to first connect it to the system and then you configure it once you are done with the connection. Before you start the connection you should have all the required cables that is the Ethernet cable,the Cd ROM and the guide. Your broadband modem has Ethernet ports in which you will plug in the Ethernet cable this will connect you to the LAN on your computer. The power adapter should be attached to the modem and you can now set up your modem. Go to your computer browser and then write down the url of your modem and log in using the username and the passcode provided in the guide. Select the type of internet connection that you want, if you opt for the dynamic IP address then you it will automatically access the IP address from your server. Your connection will need a bridge mode so you will select it.Once you are through you can now click on finish and you will have set up your modem.
Comments Off